DuPont WFPF3800 Instrucciones De Instalación página 5

IM WFCH2 V40 P :WFCH1_inst 8/13/09 1:46 PM Page 5
STEP 3
ssemble the System
1
Dry assemble the complete system (according to the configuration chosen), including all fittings and valves.
OPTION L: If using a mounting bracket (not included), position it on the Filter System Head in alignment with the inlet and outlet ports.
2
Measure the overall length (see diagram) of the configured system.
3
Reduce this measurement enough to allow for the amount of engagement (X) to determine how much pipe to remove from the line.
STEP 4
Mark Measurements and Cut the Plumbing Pipe
C UTION
Please wear safety glasses to protect
eyes when cutting.
1
Mark the section of the plumbing pipe that will need to be removed (X) to allow for the configured system (as determined in Step 3).
NOTE: Measure twice, cut once!
2
Using a pipe cutter or hacksaw, cut the marked section from the plumbing pipe.
NOTE: Use a pan or bucket to catch any remaining water in the pipes.
3
Remove any burrs or debris from the cut edges with a file.
WFCH2 Series
3
4
4
1
2
3
V4.0