Descargar Imprimir esta página

Toshiba RAV-HM561FT-E Manual Del Usuario página 53

Ocultar thumbs Ver también para RAV-HM561FT-E:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
6
Adjustment of wind direction
For best cooling and heating performance, adjust the louvers (adjustment plates of up / down wind direction)
appropriately.
 Vertical wind direction adjustment
For cooling (COOL)
Move the louvers manually and point it horizontally to
send cool air across the entire room.
How to change the louver angle
Louver
Vertical louver
 Horizontal wind direction adjustment
Selecting positions of horizontal air flow direction
Lift up the vertical louvers slightly and point them in your preferred directions.
In this case, do not use
the swing function.
103-EN
For heating (HEAT)
Move the louvers manually and point it downward to
send heated air to the floor.
The louvers can be adjusted at 8 phases linking
with 5 louvers. When changing the louver angle,
hold near the center of louver and move it slowly.
Louver
 Setting and releasing the horizontal air flow direction
Menu
(1/3)
1.Wind direction
2.Individual louver
3.Louver setting
4.Off reminder timer
5.Schedule timer
Return
Set
To swing louvers horizontally
Wind direction
Return
Louver
Swing OFF
*
* When the vertical louver is stopped,
"
Swing ON" is displayed.
Swing ON
To stop the louver swing
Wind direction
Return
Louver
Swing ON
*
* When the vertical louver is swinging,
"
Swing OFF" is displayed.
Swing OFF
NOTE
• If pointing louvers downward for cooling, dew may form on the surface of the cabinet or louvers and may drop down.
• If pointing louvers horizontally for heating, the room temperature may be uneven.
• Do not change the louver manually during swing operation. Doing so may cause a trouble of the louver related parts.
To change the louver position, stop an air conditioner and confirm its operation completely stops.
• For group control status, refer to the "Group control".
– 52 –
1
Push the [
MENU] button.
2
Push the [
] / [
] button to select
"1. Wind direction" on the menu screen,
then push the "
Set" [
F2]
Set
button.
1
Push the "
Swing ON" [
F2]
Swing ON
button on the "Wind direction" screen.
2
Push the [
CANCEL] button.
The screen returns to the menu screen.
1
Push the "
Swing OFF" [
F2]
Swing OFF
button on the "Wind direction" screen.
Push the "
Swing OFF" [
F2]
Swing OFF
button to stop swinging. The louver stops in the
position where the button is pushed.
2
Push the [
CANCEL] button.
The screen returns to the menu screen.
104-EN

Publicidad

loading