Publicidad
Idiomas disponibles
Idiomas disponibles
installation OF LOAD BARS cont...
(
)
Position the Load Bay Legs as required and secure in position. Turn the Load Bars over so that the Bolts
D
inserted in Step 2B are facing down. Lower the Load Bars onto the Legs, lining up the bolts in the Load
Bars with the holes in the Legs. You may need to adjust the position of the Bolts.
Place the M8 Flat Washers and M8 Nyloc Nuts supplied with the Universal Load Bed Legs onto the Bolts
securing the Load Bars to the Legs and hand tighten. Center the Load Bars Left to Right. Apply
weight/downward pressure to the Load Bars so that they are sitting flush onto the Legs and fasten the M8
Nyloc Nuts securing the Rack to the Legs. Place a M8 Nut Cap supplied with the Universal Load Bed Legs
over each of the M8 Nyloc Nuts.
Congratulations, you have completed your installation. Take a step back and admire your work. Good Job!
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
(
)
Now's the time to visit your favorite Front Runner dealer in person or online.
A
TRBU001 / KRLBUNI1_REV_A01
6
Publicidad
