vitapur VWD5446BLS Guía De Uso Y Cuidado página 8

Operation
1. DISPENSING COLD WATER
1
Adjusting the Cold Water Temperature:
The temperature of the cold water reservoir is monitored by a cold water
control located at the rear of the dispenser. Using a screwdriver, turn the
dial clockwise between lower setting ( ) for warmer water and higher
setting ( ) for colder water until the desired temperature is reached. If
water is not being properly dispensed, there could be possible ice build-up
in the reservoir due to the thermostat being set too cold. If this happens,
slowly rotate the thermostat set screw counterclockwise to a warmer setting.
NOTE: Any change to the cold water temperature control may effect Energy Star efficiency.
2. DISPENSING HOT WATER
2
WARNING: Hot water temperatures can reach above 194˚F/90˚C and produce severe scalding.
Never let children dispense water without direct adult supervision.
NOTE: The hot water temperature is factory set and cannot be adjusted.
Going Away On Vacation
When not using the dispenser for long periods of time or when going on vacation,
to conserve energy, unplug the dispenser and drain the reservoirs (see Draining
the Reservoirs). Follow Initial Product Cleaning Procedures upon return and
startup of the dispenser.
2
3
3
4
4
1
3 Min
5