Bornay WIND+ Manual página 40

Introduction
This manual explains the installation, handling and operation of the wind turbine
controller.
The Wind + MPPT charge controller is designed to work exclusively with Bornay
Wind+ wind turbines.
The Bornay Wind+ regulator controls the wind turbine and the power it produces to
charge the battery bank to which it is connected.
The design allows the unit to be used in 12V, 24V or 48V systems.
This manual is attached to the wind turbine manual.
Both manuals should be read and perfectly understood before switching on the
installation.
For doubts and queries, contact your distributor.
40