Bornay WIND+ Manual página 52

LEDS
The equipment is equipped with LED indicators to inform about the status of the
system. The functions are as follows:
- Blue: Internet connection, flashes every second, as long as the device is
powered, and the device is connected to the internet.
In case of fixed LED either off or on check the ethernet wiring.
Note: In the start-ups wait 1 minute from the connection to the batteries, in
case of not turning on even having the equipment connected to the
internet, disconnect the power to the regulator very briefly and reconnect
it.
- Green: Power of the regulator, Once the equipment is powered, this fixed
pilot will be turned on.
- Orange: Power that is being generated by the regulator, from 5% of the
nominal working power this LED will be lit regulating the luminous intensity
depending on the power that is being generated.
- Red / Brake, this pilot shows the percentage of brake that is applying the
regulator also regulating the light intensity. In the case of pressing the
emergency mushroom the pilot will look with maximum intensity since the
brake will be 100%.
Note: The brake can be operated by the mushroom or via the brake button
on the website. In both cases the braking will be 100%, only when the
regulator is responsible for applying the brake to control the wind turbine
will the brake be set below 100%.
52