Bornay WIND+ Manual página 56

Monitoring
- Power: Power generated by the mill at the output of the regulator.
- Battery voltage
- Wind speed: Wind speed in case of having an anemometer.
- Power generated today: Sum of KW generated from 00:01 to the
current time. The sum is updated every hour.
- Heatsink temperature: temperature of the aluminium fins at the rear of
the equipment.
- Battery current: Current at the output of the regulator.
- Angular speed: Speed at which the rotor is turning.
- Braker: Percentage at which the drive is braking.
- Temperature Box: Temperature of the resistors on charge of braking
the wind turbine.
- State: It is the state in which the mill is located.
56