Publicidad
Overview IF240-B automatic setting tool
1. Housing
2. Rollers
3. Stop bar
4. Disc magazine
5. Fastener magazine
6. Feed mechanism
7 . Empty belt guide
8. Bearing block
9. Telescopic tube
10. Locking lever
11. Setscrew for depth stop
12. Socket E320 / 8 mm AF
13. Drive shaft
14. FEIN cordless screwgun set
15. Discs
16. Weight
17 . Magazine belt
18. Retainer
19. T-handle
20. Marker nipple
Description of functions
The automatic setting tool is used for the efficient fastening of insulation boards and
waterproof membranes to steel sheet and wood.
The tool and fasteners are optimally matched to ensure the operative can achieve high
performance as well as working ergonomically and without becoming unduly tired.
As soon as the automatic setting tool is rolled to the next fastening point, the operative
presses down vertically on the T-handle, which produces a stroke movement.
A mechanical depth stop allows fastening to take place all in the one process.
Then the T-handle rises again under spring pressure. At the same time the next faste-
ner and disc are automatically brought into the working position.
Transport
DANGER!
Falling load
Do not suspend the tool by the handles from a crane. The tool must be lifted
on to the roof in the transport container using a rope hoist.
The weights of the various models can be found
in the section on "Technical data".
29
Publicidad
