Descargar Imprimir esta página

SFS intec IF240-B Manual De Usuario página 35

Publicidad

Maintenance, servicing and warranty
Maintenance
• Clean the tool regularly, especially the parts in the lower housing.
• Protect the bearing block and the telescopic tube after operation by using the
enclosed spray.
• Never use lubricants!
• Protect the tool against moisture using the plastic cover.
Service
For technical information, please contact SFS intec tool service.
CAUTION!
Cut injury hazard!
On the disassembly of the telescope and in the area of the slider, there is the
risk of cut or crushing injury. Carry out disassembly carefully while wearing
personal protective equipment.
Warranty
1. This setting tool has been carefully checked, tested and subjected to strict quality
control.
2. We undertake under the warranty to rectify free of charge defects on the setting
tool that occur within 24 months of the date of purchase by the end user and can be
traced back to a material or manufacturing defect. Individual special regulations apply
to the conditions of the warranty in some countries. We reserve the right to rework
defective parts or replace them with new ones. The ownership of the replaced parts
is transferred to us.
3. Improper usage or handling as well as the opening of the tool by unauthorised repair
centres will render void any claims under the warranty. The warranty excludes the
following: damage caused by penetration of water or other liquids, a cut or damaged
cable, motor damage and mechanical damage caused by overloading. Wearing parts
are also excluded, e.g. rechargeable battery, depth stop, drive bit etc.
4. Claims under the warranty can only be accepted given notification without delay of
defects (also in case of transport damage). The statute of limitations is not automati-
cally extended by the provision of service under the warranty.
5. If you wish to make a claim under the warranty, please send the original proof of
purchase, together with the tool, to one of our SFS sales outlets. You will find these
at www.sfsintec.biz.
6. Due to the obligations undertaken by us under the warranty, as far as permitted by
the law, all further claims by the purchaser - in particular the right to rescission, price
mitigation or the assertion of claims for damages - are excluded.
7 . The purchaser has the choice of the right to price mitigation (reduction of the
purchase price) or rescission (cancellation of the contract of sale), if we are not able
to rectify, within a reason period of time, any defects that occur.
35

Publicidad

loading

Productos relacionados para SFS intec IF240-B