Husqvarna K 535i Manual De Usuario página 12

Abrasive blades
WARNING:
with water. The strength is impaired when
abrasive blades are exposed to water or
moisture, which results in an increased risk
of the blade breaking.
CAUTION:
is not allowed with the Vac attachment. Use
of abrasive blades causes unnatural wear
on the Vac attachment.
CAUTION:
with thickess exceeding maximum
recommended thickness, refer to
data on page 23
• Do not use worn reinforced wheels from larger
power tools. Wheels intended for a larger power tool
are not suitable for the higher speed of a smaller tool
and may burst.
• The cutting material on abrasive blades consists of a
grit bonded agent using an organic binder.
Reinforced blades are made up of a fabric or fibre
base that prevents total breakage at maximum
working speed if the blade should be cracked or
damaged.
• A cutting blade's performance is determined by the
type and size of abrasive corn, and the type and
hardness of the bonding agent.
• Ensure the cutting blade is not cracked or damaged.
• Test the abrasive blade by hanging it on your finger
and tapping it lightly with a screwdriver or the like. If
the blade does not produce a resonant, ringing
sound it is damaged.
745 - 008 - 12.11.2018
Do not use abrasive blades
Cutting with abrasive blade
Do not use abrasive blades
Technical
• Ensure that correct abrasive blade is used on the
intended material.
Diamond blades
WARNING:
blade to cut plastic material. The heat
produced during cutting may melt the plastic
and it can stick to the cutting blade and
cause a kickback.
WARNING:
very hot when used. An overheated blade is
a result of improper use, and may cause
deformation of the blade, resulting in
damage and injuries.
Note:
Sharpen the blade by cutting soft material such
as sandstone or block.
• Always use a sharp diamond blade.
• Diamond blades can become dull when the wrong
feeding pressure is used or when cutting certain
materials such as heavily reinforced concrete.
Working with a dull diamond blade causes
overheating, which can result in the diamond
segments coming loose.
• Diamond blades consist of a steel core provided with
segments that contain industrial diamonds.
• Diamond blades are ideal for masonry, concrete and
other composite materials.
• When using diamond blade make sure that it rotates
in the direction indicated by the arrow on the blade.
xxxx
Never use a diamond
Diamond blades become
11