Husqvarna K 535i Manual De Usuario página 15

3. Replace the blade guard if it is damaged. See
attach the cutting blade on page 13
Rope eyelet
The product has a rope eyelet. The rope eyelet can be
used to lift and lowering the product. Attach an
applicable strop to the rope eyelet to use it for lift and
lowering.
The rope eyelet can be used to attach the product to a
solid object to prevent it from fall and damage persons
or equipment.
To do a function check before you use
the product
1. Do a check of the rear right hand guard (A) to make
sure that it is not damaged.
2. Do a check of the power trigger lockout (B) to make
sure that it operates correctly and that it is not
damaged.
3. Do a check of the keypad (C) to make sure that it
operates correctly.
4. Do a check to make sure that all parts and guards
are correctly attached and not damaged or missing.
5. Charge the battery and make sure that it is correctly
attached to the product.
6. Make sure that the power cutter stops when you
release the power trigger.
C
B
A
14
To
Operation
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
Note:
The battery does not charge if the battery
temperature is more than 50 °C/122 °F. If the
temperature is more than 50 °C/122 °F, the battery
charger makes the battery become cool before the
battery charges.
To connect the battery to the battery
charger
Note:
Charge the battery if it is the first time that you
use it. A new battery is only 30% charged.
1. Make sure that the battery is dry.
745 - 008 - 12.11.2018