Publicidad
Idiomas disponibles
Idiomas disponibles
5.3.5. NetRemote PIN setup
Allows you to define a PIN number to be entered before being able to connect to radio remotely
over a network
5.3.6. Network profile
This displays a list of the networks remembered by radio (up to a maximum of 4). You can see the list
of registered networks through Menu > System settings > Network > Network profile >. From here
you can delete unwanted networks by turning and press OK then confirming delete Yes.
5.3.7. Clear network settings
This option will clear current network settings, to allow you to join an alternative network more
easily.
5.3.8. Keep network connected
This option allows you to define whether radio remains connected to its network in Standby mode
and when not in Internet radio mode. This is necessary for remote operation and audio streaming in
Music player mode.
Note: This option is forced to 'Yes' to keep the network connected if connection is configured using
the UNDOK app.
Note: It is possible to disable the WIFI network.
Method 1: When the radio is on, longpress the standby button. Radio will go into standby with WIFI
disabled.
Method 2: When the radio is on, lonpress the play/pause button on the RC to disable the WIFI
The wifi will automatically enable once the radio is turned on again.
5.4. Time/Date
⚫
Set Time/Date
⚫
Auto Update
⚫
Set Format
⚫
Set Timezone
⚫
Daylight savings
5.4.1. Set Time/Date
The date and time are displayed as dd-mm-yyyy with the first value, dd, active (flashing). Adjust each
value with the knob control. As each value is set by pressing the knob control, the next value
becomes active ready for adjustment.
5.4.2. Auto-update (from DAB, FM or Network)
Auto-update works with data sent over DAB, FM or the Internet. The clock is only updated when in a
corresponding mode, so it is best to select a mode you use regularly. DAB and FM use time signals
16
Publicidad
