LUCCI Air MOONAH GX53 Serie Manual De Instrucciones página 10

Moonah Gx53 Installation Instructions
Your ceiling fan is controlled via the remote control. There are 4 buttons (HI, MED, LOW, OFF) to control the
fan speed and one button to control light on/off. Fig. 12
Before operating the remote, the following must be considered.
-
2 x AAA 1.5V (size) batteries are required to operate the remote control. Remove the battery cover
from the back of the remote and insert 2 x AAA batteries. Ensure the polarities are correct as shown
in the battery compartment. (Fig.11)
- Test the remote by pressing and hold any button. A red LED will be lit up at the top of the
remote to indicate that there is power to the remote and it is ready for use to control the fan.
OPERATING THE REMOTE:
Before you start using the remote, take the time to read through this section and get familiar with the buttons
and function of each button.
BUTTONS ON THE REMOTE
LED indicator:
1.
indicator will be flash to indicate the pressed buttons
activated.
HI:
press it to turn on the fan at high speed.
2.
MED:
press it to turn on the fan at medium speed.
3.
LOW:
press it to turn on the fan at low speed.
4.
5. OFF: press it to turn off the fan.
: Press it to turn on / off the light.
6.
The remote has memory function. If the fan or light is turned off by the
isolating switch, it will memorise and recover the last status when turned
on next.
10 | P a g e
USING YOUR CEILING FAN
when pressing any buttons, the LED
Fig. 11
Fig. 12