LUCCI Air MOONAH GX53 Serie Manual De Instrucciones página 8

Moonah Gx53 Installation Instructions
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS SHOULD BE PERFORMED BY A
QUALITIED LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED
WIRING.
From mains supply to mounting bracket terminal block: (Fig. 8)
⚫ Connect "LIVE" supply wire to the "L" of the terminal block on the mounting bracket.
⚫ Connect "NEUTRAL" supply wire to the "N" of the terminal block on the mounting bracket.
⚫ Connect "EARTH" wire to the "
From mounting bracket to receiver and fan motor: (Fig. 8)
⚫
Connect the supply wiring quick connector (1) from the mounting bracket to the input quick connector
(1) of the fan receiver.
⚫
Connect the output wires quick connector (2) of fan receiver to the input wires quick connector (2) of
the fan assembly.
•
Carefully insert the Remote Receiver above the hanger ball in the remainder spacing in the mounting
bracket. Take care not to damage or loosen any of the wiring. (Fig. 8).
8 | P a g e
ELECTRICAL WIRING DIAGRAM
" of the terminal block on the mouthing bracket.
Fig.8