LUCCI Air MOONAH GX53 Serie Manual De Instrucciones página 11

Moonah Gx53 Installation Instructions
REPAIRING THE FAN RECEIVER & REMOTE PAIRING
NOTE: The pairing of the remote and receiver has been done at the factory.
When the ceiling fan is installed, pairing the fan receiver and remote is NOT required.
Should the remote and receiver lose control after installation or during use, the pairing of the remote and
the receiver must be repaired. Below are the operating symptoms and method to repair the pairing of the
DC ceiling fan remote and receiver.
Issues:
•
Loss of control - Fan is only running at high speed after installation
•
Loss of control - No reverse function after installation
•
Loss of control - Remote cannot communicate with the receiver
Solution:
•
Switch off the main power of ceiling fan for 30 seconds.
•
Switch on the main power of the ceiling fan. Press and hold the "OFF" button on the remote for 3-5
seconds within 30 seconds after switching on. There will be a notification 'beep' sound from the receiver
to indicate that the paring process is successful.
•
Turn on and select the different speed of the ceiling fan to check the operation of the fan.
REVERSE FUNCTION
Your ceiling fan can operate in either summer or winter mode.
SUMMER Mode: The reverse switch should be in the SUMMER position to rotate the fan in an anticlockwise
direction. The airflow will be directed downwards, for cooling in summer.
WINTER Mode: The reverse switch should be in the WINTER position to rotate the fan in a clockwise direction.
The airflow will be directed upwards, for energy conservation in winter.
11 | P a g e
Fig. 13