SantaFe ULTRA Serie Instrucciones De Instalación página 20

CONTROLS
12
A control must be used with the Santa Fe Ultra120V. Santa Fe offers the DEH 3000 proprietary control. The DEH 3000
allows homeowners to monitor and control relative humidity and proper ventilation levels in their home. This control is
also available with a remote sensing option.
NOTE: The DEH 3000 is sold separately. Other thermostats are compatible with the Santa Fe Ultra120V.
1. Wiring Controls
CAUTION!
DO NOT ALLOW THE 24V TERMINAL FROM THE SANTA FE ULTRA120V TO CONTACT THE COM
TERMINAL ON THE SANTA FE ULTRA120V OR DAMAGE TO THE TRANSFORMERS WILL RESULT.
a. Circuit Breaker
To prevent damage to the 24 volt control transformer, the Santa Fe Ultra120V comes with a resettable circuit
breaker. Check wiring for any electrical short and repair before resetting the breaker. Resetting the circuit
breaker without correcting the electrical short may result in transformer damage. Be sure to check the
electrical schematic in this manual or inside the access panel of the Santa Fe Ultra120V before making any
control connections. The reset button for the circuit breaker can be found on the side of the unit.
b. Control Connections
The control and the Santa Fe Ultra120V are labeled to prevent confusion. Depending on the control, some of
the screw terminals on the Santa Fe Ultra120V may not be used. Be sure to consult the electrical schematic
in this manual (see page 8) or inside the access panel of the Santa Fe Ultra120V before making control
connections.
20
Santa Fe ULTRA120V Installation & Operation Instructions
Circuit Breaker
Reset Button
Side View
Santa-Fe-Products.com | 800.533.7533