The filter should be cleaned if the suction power decreases when the rechargeable battery is fully charged.
Empty the dust container and, if necessary, leave it to dry before or after each time it is used to absorb water.
1.
Make sure that the appliance is switched off and is not on charge.
2.
Unlatch, remove and empty the dust container („Emptying the dust container" auf Seite 26).
3.
Remove the filter holder, together with the filter, from the dust container.
4.
Rinse out the dust container with clear water.
5.
Turn the filter anti-clockwise to release it from the filter holder.
6.
Knock out the filter and filter holder over a waste bin and remove any dirt with a soft brush as necessary.
7.
If necessary, wash out the filter in soap solution and then allow it to dry completely.
8.
Insert the filter in the filter holder and secure it by turning it clockwise.
9.
Insert the filter holder in the dust container.
10. Secure the dust container on the appliance again.
Cleaning the brush roller
Soiling may prevent the brush roller from rotating freely. Clean the brush roller regularly. For additional informa-
tion, see illustrated Quick Start Guide Cleaning.
1.
Make sure that the appliance is switched off and is not on charge.
2.
Remove the floor nozzle from the appliance, if it is attached.
3.
Unfasten the stop catch for the brush.
4.
Remove the brush.
5.
Remove any hairs and dirt from the brush; if necessary, use tweezers or scissors and do so carefully.
6.
Re-insert the brush and secure it with the stop catch.
Cleaning the appliance
1.
Make sure that the appliance is switched off and is not on charge.
2.
Wipe the housing with a slightly damp cloth and then rub it dry.
TIP: Do not use any sharp, abrasive cleaning agents or hard brushes for cleaning.
Storing the appliance
Store the appliance and accessories in a cool, dry place out of the reach of children.
Some of the additional attachments can be stored on the wall mount.
c
lEaninG anD mainTaininG ThE appliancE
27