AROHA SM11W Guía De Referencia Rápida página 9

Connect to your Wi network
1. Make sure that Bluetooth on your phone is activated and your Wi-Fi network
supports the 2.4GHz band.
2. Scan the QR code on the right
Google Play or Apple APP Store and install the application.
3. Open the "Smart Life" app and create an account by following the instructions.
4. Select the "Home" tab( ) and click "Add Device".
5. Press the test button on the smoke detector 4 times within 1 second until the red
light starts blinking. The app detects the smoke detector automatically.
Maintenance and cleaning
There are a few simple steps you need do to keep it working properly:
1. Test the smoke detector once a month.
2. Do not paint the smoke detector. Paint will seal the vents and interfere with the sensor's ability to detect smoke.
3. Never attempt to disassemble the smoke detector to clean inside. This will damage the alarm.
4. Clean the smoke detector at least once a month to remove dust, dirt or debris. Use a vacuum cleaner with a soft
brush and vacuum all sides and covers of the smoke detector.
or search for the "Smart Life" app on the
If you get stuck during the process, please click the "Scan" button( ) in the upper
right corner and scan the QR code on the left for visual instructions
08