Sharp 4W-B55FTSU Guía De Configuración página 8

Initial Installation
Follow the steps below one by one when using the TV for the first time. Some steps may not be
necessary depending on your TV installation and connection.
Connecting antenna cable
0 Connect an antenna cable to the antenna terminal.
CD Cable without a CATV converter
Cable TV lead-In
----------lit Dl�f===c::J---+-
0 VHF/UHF antenna
75-ohm coaxial cable (round)
----------� e>==jj==c::,- antenna
8 Plug the AC cord into the AC outlet.
■
/!0Jh31
F-type connector should be fingertightened only.
When connecting the RF cable to the lV set, do not tighten F-type
connector with tools.
If tools are used, it may cause damage to your TV set
(The breaking of internal circuit, etc.)
7���
Place the TV close to the AC outlet, and keep the power plug within
reach.
CAUTION
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH
UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD
CONNECTED.
Home antenna terminal
(7s-ohm)
Coaxial cable
(commercially available)
Home antenna terminal
(75-ohm)
Coaxial cable
(commercially available)
Connect the antenna cable to
the TV using one of the
methods in the illustration as
shown (Glor
(2))
r'"' F-typeconnector
�
7
■
■
■
■
POWER
8 Press
To TV
antenna
terminal
To TV
terminal
0 Run the initial installation.
Use the remote control to make
selections.
■ Language setting
TimeZone
Firmware update notice
Network
TunerMode
■ Channel Scan
on the TV.