Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
BECOME FAMILIAR WITH THE TABLE SAW
Before attempting to use this table saw, be-
come familiar with all of its operating features
and safety requirements.
1
17
16
15
KNOW YOUR TOOL
1. LEFT EXTENSION WING
2. MITER GAUGE
3. BLADE GUARD
4. RIGHT EXTENSION WING
5. FENCE
6. SCALE
7. EXTENSION TABLE
8. FRONT RAIL TUBE
9. LEG
10. BLADE TILT LOCK
11. BLADE TILT HAND WHEEL
12. DUST PORT
13. FENCE LOCK HANDLE
14. TABLE TILT SCALE
15. BLADE HEIGHT LOCK
16. BLADE HEIGHT HAND WHEEL
17. ON/OFF SWITCH
18
2
3
14
WARNING: Do not allow familiarity with the
table saw to cause a lack of alertness. A frac-
tion of second of carelessness is enough to
cause sever injury.
4
5
13
10
11
12
ASSEMBLY
MAGNETIC SAFETY SWITCH OPERATION
The
magnetic
switch as shown as up Fig.
needs to be installed to
under side of the front
rail, see assembly section
in this manual for further
instructions.
Do not turn the cabinet saw on until all as-
sembly and adjustment instructions have been
done. To start the cabinet saw, press the green
start button (A) and to stop the cabinet saw,
press the red emergency stop button (B).
ASSEMBLY INSTRUCTIONS
1. Remove the shipping brace, pull the switch
out of the saw cabinet and remove the ship-
ping brace.
6
7
9
8
safety
Publicidad
