Publicidad
Idiomas disponibles
Idiomas disponibles
5. a) Remove the upper cover of refrigerating chamber door, install the upper hinge sleeve, door
signal line to the other side and install the door upper cover. Dismantle the stopper and sleeve
pipe from the right bottom of freezing chamber door, take out another spare stopper of
reversible door, and assemble the sleeve pipe and spare stopper on left bottom of door by screw
install the upper hinge, door signal line to the other side and install the door upper cover.
b) Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door,
take out another spare stopper (for reversible door), and assemble the sleeve pipe and spare
stopper on left bottom of door by screw. Take off the sleeve pipe and hole caps on the freezing
chamber door and mount it on the other side.
door upper cover
6. Put the freezer door on bottom hinge, then install the middle hinge and screw hole caps.
7. Take out left top hinge and cover from the accessories package, then put the refrigerator
door on middle hinge. Connect signal line terminal 4 to signal line terminal 1, and terminal 2
to terminal 3. Install top hinge cover and hole cover.
hinge cover
door signal line
sleeve pipe
sleeve pipe
Stopper
Stopper screw
middle hinge
sticker
screw
12
sleeve pipe
Stopper
Stopper screw
hole cap
screw
cover
hole cover
V.2
Publicidad
