Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 FUNCTIONS
①
③
④
A
B
2) Display
The first time the appliance is switched on, the display (including the key) will be
fully illuminated for 3 seconds and then the power corresponding to the actual
operation will be illuminated. The display lights up when the door is opened and
goes out when the door is closed. The default temperature of the cooling
compartment at the first use is 5°C. If errors occur, the display panel will show an
error code. Otherwise, the panel will display the set temperature.
3) Temperature setting
Each time the temperature setting button A is pressed, the temperature will
increase by 1ºC, and pressing button B will decrease by 1ºC. The adjustment
range of the refrigerator is from 2- 8ºC. If the limit of the range is reached, the
refrigerator will beep if an attempt is made to continue pressing the
temperature setting buttons.
4) InstantCool Mode
To enter super cooling mode, press the B button again when the refrigerator
reaches the setting of 2°C. To exit this mode, press the temperature increase
button A or the mode will end automatically after 6 hours. After exiting this
mode, the temperature setting will automatically return to the temperature
that was set before starting the InstantCool mode.
Door open alarm
If the door is not closed within two minutes, an acoustic signal will sound until
the door is closed. Press any button to stop the alarm.
1) Panel
1. Refrigeration icon
2. Freezing icon
3. Temperature
②
4. InstantCool mode icon
5. InstantFreeze mode icon
A.
Temperature increase button
⑤
B.
Temperature decrease button
15
V.2
Publicidad
