Woods MRD20GW Manual De Instrucciones página 10

Operating Instructions
GB
SET UP DEHUMIDIFIER FOR INSTALLATION
IMPORTANT:
2. Installation
BEFORE FIRST USE
Let the machine stand for 4 hours before use
Selecting a Location
Important
1.Dehumidifier must be operated in an
enclosed area to be most effective.
Close all doors, windows, and other openings
to the room. The effectiveness of the
dehumidifier depends on the rate at which
new moisture-laden air enters the room.
2.Place the dehumidifier in a location that
does not restrict airflow through the
front of the unit.
3.A dehumidifier operating in a
room will have little or no effect
in drying an adjacent enclosed storage area,
such as a closet, unless there
is adequate circulation of air in and
out of the area. lt may be necessary
to install a second dehumidifier in the
enclosed area for satisfactory drying.
4.Ensure that the unit is placed on a stable and
flat surface. If the surface is not kept stable,
there is a risk that it may cause excessive
vibration, allowing water to be released.
5.The dehumidifier must have at least 20 cm
free space around the entire dehumidifier.
6)Fuse for PCB: F1: 2010 Serie(s), AC250V, T,
2.0A; F2: 2010 Serie(s), AC250V, T, 5.0A/6.3A
10