Publicidad
Idiomas disponibles
Idiomas disponibles
• Comfortable operation due to well-structured frontpanel-design
• With illuminated CD-tray
• LED-display of all important functions
• For standard CDs 8 cm and 12 cm
• 19"-dimensions
4.2 Main unit
Frontpanel:
1. POWER SWITCH
Press this button to start operation.
2. DISC-TRAY
To enter the disc. Please refer to the explanations under 6.2 CD-tray.
3. OPEN/CLOSE BUTTON
Via the Open/Close-button, you can open and close the CD-tray.
Rear panel:
www.omnitronic.com
FADER
START
5
4. VOLTAGE SELECTOR
Make sure that the indication corresponds to the available voltage.
5. START/PAUSE-SOCKETS
Via the Start/Pause-socket, the respective CD-player can be remotely controlled. If you are using a mixer
with Faderstart-function connect the player with the Control Out-socket. Please note that these sockets must
never be connected with any voltage. Please refer to 6.10 Faderstart.
6. DIGITAL OUT-SOCKET
The music-signal of this socket is digital. Connect the output to the respective input of a digital amplifier for
example.
7. AUDIO OUT-SOCKETS
The music-signal of these sockets is analogue. Connect the output to the respective input of your mixer.
8. REMOTE CONTROL
Connect the controller via these plugs. Make sure that you connect the player Unit 1 to the controller Unit 1
and the player Unit 2 to the controller Unit 2.
2
3
®
DIGITAL
AUDIO
CONNECT TO
OUT
OUT
REMOTE CONTROL 2
L
R
6
7
8
1
3
4
Type:
OMNITRONIC CDP-600
Power supply:
115/230 V AC, 50/60 Hz
Power consumption: 20 W
115 V
230 V
60 Hz
50 Hz
OMNITRONIC SHOWEQUIPMENT GmbH, GERMANY
FADER
START
AC INPUT
115/230 V, 50/60 Hz
~
10
9
5
22/55
2
~
DIGITAL
AUDIO
OUT
OUT
CONNECT TO
REMOTE CONTROL 1
L
R
6
7
8
10602320_V_1_0.DOC
Publicidad
