Descargar Imprimir esta página

Dea NET230N Instrucciones De Uso Y Advertencias página 48

Ocultar thumbs Ver también para NET230N:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 131
3 Selection type of operators
1. Scroll down the parameters with
P028;
2. Access the parameter by pressing the
3. Acting on
and
Type 00
• 005 6NET
• 001 Look - Mac
• 006 9NET
- Sting
• 007 Gulliver
• 002 Ghost
- Rev
• 003 Livi 500
- 500MT - 502 -
502EN - 550PL
• 004 Livi 500P -
500MT/RF - 502R
- 502R/EN - 502L
• 005 Oli
Warning: Selecting the OLI operators, all indicated values related to the
operator force (P037 - P038 - P039 - P040), are automatically set to 100%
without any possibility of change. For this type of operator, the obstacle de-
tection is not active and the adjustment of the thrust force can be executed
acting on the operator valves only.
Warning: If you are using non DEA System operators, set the parameter on
the closer value for family type and performances (refer to table on page
EN-3).
4. Confi rm your choice by pressing the
P028).
4 Selection operating with or without encoder
1. Scroll down the parameters with
P029;
2. Access the parameter by pressing the
3. Acting on
and
- d000=for operators with encoder;
- d001=for operators without encoder (Slow down is activated);
- d002=for operators without encoder (Slow down not activated);
4. Confi rm your choice by pressing the
P029).
5 Selection 1 or 2 operators functioning
1. Scroll down the parameters with
P030;
2. Access the parameter by pressing the
3. Acting on
and
- d001=for a single motor operating;
- d002=for 2 motors operating;
4. Confi rm your choice by pressing the
P030).
6 Selection of direction of motion (only Type 00 and Type 03)
1. Scroll down the parameters with
you visualise P063;
2. Access the parameter by pressing the
3. Acting on
and
- d000=motor in standard position;
- d001=motor in inverted position;
4. Confi rm your choice by pressing the
returns again to P063).
Warning: The parameter automatically reverses the
motors output open/close.
Warning: Changing this parameter you need to change
the parameters for the opening and closing limit switches.
EN-14
and
key;
keys, set:
Type 01
Type 02
Type 03
• 003 Livi 902EN
• 003 Pass
• 004 Livi 902R -
• 004 Stop
902R/EN/F
key (display returns again to
and
keys until you visualise
key;
keys, set:
key (display returns again to
and
keys until you visualise
key;
keys, set:
key (display returns again to
and
keys until
key;
keys, set:
key (display
! IMPORTANT !
keys until you visualise
Type 04
Type 05
• 000 Lato • 005 Rock
! IMPORTANT !

Publicidad

loading