Publicidad
Idiomas disponibles
Idiomas disponibles
If you want carry out a cold wash all the
indicators must be off.
SPIN SPEED button
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
It is possible to modify the spin speed
without pausing the machine.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
The machine is fitted with a special
electronic device, which prevents the
spin
cycle
without
particularly unbalanced load. This
reduces the noise and vibration in the
machine and so prolongs the life of
your machine.
NIGHT WASH button
(only available on certain models)
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
KEY LOCK
Digital Display
The display's indicator system allows you to
be constantly informed about the status of
the machine.
load
or
on
1) DOOR LOCKED INDICATOR LIGHT
36
During the phase in which the water is
held in the tub, the relevant indicator light
blink to show that the machine is at a
standstill.
Deselect the option to end the cycle with
a spin dry (which may be reduced or
cancelled using the appropriate button)
and emptying phase.
Thanks to electronic control, the water in
the intermediate phases is
silently, making this option very useful for
washing at night.
Pressing
simultaneously
TEMPERATURE SELECTION and SPIN
SPEED
for
about 3
machine allows you to lock the keys. In
this
way,
you
accidental or unwanted changes if a
button
on
the
accidently during a cycle.
The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or turning off the appliance.
The indicator light is illuminated when the
door is fully closed.
Close the door BEFORE selecting the
START/PAUSE button.
emptied
the
buttons
seconds, the
can
avoid
making
display
is
pressed
Publicidad
