DJI High-Bright Remote Monitor Guía De Usuario página 15

Idiomas disponibles

100

CH1

CH2

Tap Twice to Zoom In: when enabled, tap the screen twice on the monitoring interface to

zoom in on the area tapped. Drag the image to view the rest area of the image. The rectangle

on the upper right corner will show where the magnified area is located in the whole image.

Tap twice multiple times to switch the magnification of the display between 2x, 4x, and

original size.

Focus Peaking: when enabled, users can set the display color and percentage for color

peaking or the percentage for aperture peaking.

When Mirror Control mode is enabled in the Ronin 4D main monitor, users can access the

complete live view of the Ronin 4D main monitor on the remote monitor and adjust the

parameters. The touch operations on the live view are the same as those on the Ronin 4D main

monitor. The icons below correspond to the physical buttons on the Ronin 4D main monitor. Tap

the icons on the screen to perform the same functions of the buttons.

18. Home Button

Tap to enter the menu screen.

19. Focus Peak Button

Tap to enable or disable the focus assist display. The function is set to Focus Peaking by

default. Go to the menu, select Display, then Focus Assistant, and set the PEAK Button

Function to LiDAR Waveform and Focus Mag. The function of the icon on the screen of the

remote monitor will be updated accordingly.

20. LUT Button

Tap to enable or disable LUT display. LUTs are customizable. Go to the menu and select

Display then LOOK to set LOOK as an imported custom LUT. Refer to the LOOK section in

the Ronin 4D User Manual for more information.

21. EXP Button

Tap to enable or disable the exposure display. The feature supports Zebra Stripes, Waveform,

and False Color. Go to the menu and select Display then Exposure Assistant to apply

settings.

22. Playback Button

Tap to access playback and play the last recorded video.

24.5M

5600

Clear

08:02:16:06

False Color Effect Image

SS 1/50

IRIS

F2.8

800

A001C0018