DJI High-Bright Remote Monitor Guía De Usuario página 17

Idiomas disponibles

Custom Hand Grips

Set the function of the specific buttons and dials on the left and right hand grips if the Ronin 4D

Hand Grips are mounted to the monitor.

Screen Settings

Set the frame guide ratio and transparency, enable or disable the safety zone and center marker,

and set the safety zone ratio and brightness.

When an anamorphic widescreen lens is in use, set the appropriate anamorphic desqueeze

display ratio to restore the monitoring liveview to the normal effect.

When specific cameras are in use with the transmitter device, enable the virtual widget to set the

camera parameters using the virtual buttons on the monitor screen.

Users can also use the color calibration function in Screen Settings.

Color Calibration

Users can import a 33 point 3D LUT file for color calibration with .CUBE in this menu to apply

color calibration according to their requirements. Only use letters, numbers, or underscore "_" to

name the file and DO NOT use special characters or spaces.

When generating the file for color calibration, make sure to enable Color Calibration Mode

in this menu before the color calibration steps. Otherwise, there will be color difference

after color calibration is applied.

1. Copy the file for color calibration to the root directory of the microSD card and insert the

microSD card into the slot on the monitor.

2. Tap Import Color Profile in the Color Calibration menu. The files for color calibration will be

listed on the screen.

3. Tap

to the right of the file and tap Import.

4. The color calibration is applied to the monitor after successful import.

5. Tap Reset Settings in the Color Calibration menu if color calibration is not required.

Unit

Set the unit of the focus meter on the monitoring interface to Imperial (feet) or Metric (meters).

Language

Select the system language in the language list.

Local Playback

View and play the locally recorded videos on the microSD card in the playback view.

The monitor will play the last recorded video automatically after entering the playback view. Tap

to view the video list. Tap

About and Help

View information such as the firmware version and serial number under About and scan the QR

code to view the video tutorials under Help.

to return to the monitoring interface.