DJI High-Bright Remote Monitor Guía De Usuario página 16

Idiomas disponibles

System Menu

Tap on the bottom left to enter the system menu for multiple settings.

Connection Settings

Link devices and switch between Control mode and Broadcast mode.

General Settings

Input & Output Settings

HDMI/SDI OSD: enable or disable on-screen display on the HDMI/SDI output device.

HDMI/SDI Aspect Ratio: Normal or CenterCrop (16:9).

HDMI/SDI Frame Rate: Auto or 24/25/30/50/60. When an HDMI/SDI output device is connected,

the monitor will also prompt a window for frame rate selection. Low latency is selected by default,

corresponding to the option 60 in this setting. Auto corresponds to the option Auto in this setting.

The DJI Remote Monitor Expansion Plate is required when using HDMI/SDI output functions.

Input Signal: select OcuSync when using the transmitter as the input source. Select HDMI when

using the HDMI port on the monitor as the input source.

Rec Trigger: when a camera with the rec trigger function is used for the transmitter device,

enable or disable the function in this setting.

USB-C Function: select Update when using the USB-C port for firmware update. If Webcam is

selected, the video stream from the monitor can be used as a webcam input and uploaded to the

computer connected to the USB-C port.

Recording Device

Select the device for video recording.

TX+SD: when using with Ronin 4D, control both the monitor and Ronin 4D to record videos

simultaneously by the record button on the monitoring interface of the monitor or on Ronin 4D.

The recorded files will be stored to both the storage device on Ronin 4D and the microSD card in

the monitor.

TX: when using with Ronin 4D, control Ronin 4D to record videos by the record button on the

monitoring interface of the monitor or on Ronin 4D. The monitor will not perform local recording.

The recorded files will be stored to the storage device on Ronin 4D.

SD: control local recording by the record button on the monitoring interface of the monitor. The

transmitter device will not perform recording. The recorded files will be stored to the microSD

card in the monitor.

Storage

Tap to view the free storage of the microSD card in the monitor and format the microSD card.

Gyroscope Control

Enable or disable Gyroscope Control. The Gyroscope Control icon will not appear on the

monitoring interface when Gyroscope Control is disabled.