Zanussi ZWT 71401 WA Manual De Instrucciones página 16

buttons. The green pilot light of the button 8
starts to flash.
The selector dial can be turned either clockwise
or counterclockwise. Turn to position
set programme/Switching the machine off.
At the end of the programme the selector
dial must be turned to position
switch the machine off.
Caution! If you turn the programme
selector dial to another programme when
the machine is working, the red pilot light of
button 8 will blink 3 times and the message Err
is displayed to indicate a wrong selection. The
machine will not perform the new selected
programme.
Reduce the spin speed by pressing button
2
By selecting a programme, the appliance propo-
ses automatically the maximum spin speed pro-
vided for that programme.
Press button 2 repeatedly to change the spin
speed, if you want your laundry to be spun at a
different speed. The relevant light illuminates.
Select the available options by pressing
buttons 3, 4 and 6
Depending on the programme, different func-
tions can be combined. These must be selected
after choosing the desired programme and be-
fore pressing button 8.
When these buttons are pressed, the corre-
sponding icons appear on the display. When
they are pressed again, the icons disappear. If
an incorrect option is selected, the integrated
red pilot light of the button 8 flashes for 3 times
and the Err message appears on the display for
a few seconds.
For the compatibility among the washing
programmes and the options see chapter
«Washing Programmes».
Select the Delay Start by pressing button
10
Before you start the programme, if you wish to
delay the start, press the button 10 repeatedly,
to select the desired delay.
The selected delay time value (up to 20 hours)
will appear on the display a few seconds, then
16
the duration of the programme will appear
again.
You must select this option after you have set
the programme and before you press button 8.
to re-
You can cancel or modify the delay time at any
moment, before you press button 8.
Selecting the delayed start:
, to
1. Select the programme and the required op-
tions.
2. Select the delay start by pressing the but-
ton 10.
3. Press button 8:
– the machine starts its hourly countdown.
– The programme will start after the selec-
ted delay has expired.
Cancelling the delayed start after having press-
ed button 8:
1. Set the washing machine to PAUSE by
pressing button 8.
2. Press button 10 once until the symbol
is displayed
3. Press button 8 again to start the pro-
gramme.
Important! The selected delay can be changed
only after selecting the washing programme
again.
The Delay Start can not be selected with
DRAIN programme.
Start the programme by pressing button 8
To start the selected programme, press the but-
ton 8, the green pilot light of the button 8 stops
blinking.
To interrupt a programme which is running,
press the button 8: the green pilot light starts
blinking.
To restart the programme from the point at
which it was interrupted, press the button 8
again. If you have chosen a delayed start, the
machine will begin the countdown. If an incor-
rect option is selected, the red pilot light of the
button 8 blinks 3 times and the message Err is
displayed for a few seconds.
'
www.zanussi.com