Frigomat FR260 Manual De Uso Y Mantenimiento página 68

Fig.3
Fig.4
Fig.5
29 - ENGLISH
PREPARE APPROVED (100 PPM)
CLEANING/SANITIZING SOLUTION
(Example: KAY-5 ACCORDING TO THE
MANUFACTURER'S SPECIFICATIONS)
• Pour the maximum admitted load of cold
drinking water into the machine to rinse the
surfaces which were just treated with the
sanitiser.
• Drain the rinse water and turn the machine off.
• When pre-washing is over, all the removable
parts in contact with the product must be
disassembled and sanitised in a separate tub.
SANITISING REMOVABLE PARTS
PREPARATION OF WASHING TUB
• Wash your hands well and/or wear disposable
gloves.
• Fill a clean tub with a sufficient amount of
drinking water at approximately 50°C / 122°F
and the sanitizer.
PREPARE APPROVED (100 PPM)
CLEANING/SANITIZING SOLUTION
(Example: KAY-5 ACCORDING TO THE
MANUFACTURER'S SPECIFICATIONS)
• Prepare the supplied brushs and the OR
disassembly device and immerse them in the
solution.
•
REMOVING AND CLEANING THE DOOR
(Optional)
• Lift the blocking lever and open the door by
rotating it to the left.
• Pull the hinge pin upwards and remove the
door, holding it with both hands (Fig.5).