Sony HT-M7 Manual De Instrucciones página 14

To control the receiver
B ?/1 (on/standby)
Turns the receiver on or sets it to standby mode.
Saving the power in standby mode
When "CTRL.HDMI" is set to "CTRL OFF"
(page 48).
C Input buttons
Selects the equipment you want to use. When
you press any of the input buttons, the receiver
turns on.
D MOVIE, MUSIC, GAMING (page 41)
E MEMORY
Stores a station during tuner operation.
F
ENTER
Enters the selections.
G
Numeric buttons
Presets or tunes to the preset stations (page 39).
H
AMP MENU
Displays the menu to operate the receiver.
I
, V/v/B/b
Press V/v/B /b to select the settings, then press
to enter/confirm the selection.
J
DISPLAY
Views information on the display panel.
K M-TURBO
Turns the M-TURBO function on or off.
M-TURBO function reinforces the bass and
creates a more powerful sound.
L m/M, NX, ./>
(RM-AAU135 only)
Operates the USB device: Backward/forward,
play/pause, skip operation.
TUNING +/–
Scans a station.
FM MODE
Selects the FM reception mode (monaural or
stereo).
PRESET +/–
Selects preset stations.
M FOLDER +/–
(RM-AAU135 only)
Selects a folder of the USB device.
O REPEAT
(RM-AAU135 only)
Plays a track or a folder repeatedly of the USB
device.
DIMMER
(RM-AAU136 only)
Adjusts the brightness of the display panel.
14
US
P
SLEEP
Sets the receiver to turn off automatically at a
specified time.
The display changes cyclically as follows.
0-30-00 t 1-00-00 t 1-30-00 t 2-00-00 t
OFF
When Sleep Timer is being used, "SLEEP"
indicator lights up on the display panel.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time
appears on the display panel. If you press
SLEEP again, the Sleep Timer will be canceled.
Q MASTER VOL +/–
Adjusts the volume level of all speakers at the
same time.
R MUTING
Turns off the sound temporarily.
Press MUTING again to restore the sound.
S RETURN O
Returns to the previous menu.
T D.TUNING
Enters direct tuning mode.
To control a Sony TV
A TV ?/1 (on/standby)
Turns the TV on or off.
M
TV VOL +/–
(RM-AAU136 only)
Adjusts the TV volume.
N TV PROG +/–
Scans for the preset TV channels.
U
TV MUTING
Activates the TV's muting function.
V
TV INPUT
Selects the input signal (TV or video).
Note
The above explanation is intended to serve as
examples.