Sony HT-M7 Manual De Instrucciones página 50

SPEAKER menu
You can adjust the position and distance of the
speakers connected to this receiver.
x SUR SPK
Lets you select the surround speaker position
according to the speaker configuration (page
31).
x FL DIST., FR DIST., CNT DIST.,
SL DIST., SR DIST., SBL DIST.*,
SBR DIST.*, SW DIST.
Lets you adjust the distance from your seating
position to each speaker (front left/right,
center, surround left/right, surround back left/
right*, subwoofer).
If both front speakers are not placed in equal
distance from your seating position, set the
distance to the closest speaker.
* HT-M7 only.
EQ menu
You can adjust the tonal quality (bass/treble
level) of the front speakers.
x BASS
x TREBLE
TUNER menu
You can name the preset stations.
x NAME IN
Lets you set the name of preset stations. For
details, see "Naming preset stations" (page
40).
x AM STEP*
Lets you change the AM STEP to either 9 kHz
or 10 kHz. For details, see "Changing the AM
tuning scale" (page 39).
* USA, Latin America, Argentina and Mexico
models only.
50
US
AUDIO menu
You can adjust settings for the audio to suit
your preference.
x A/V SYNC
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
• SYNC ON (Delay time: 60 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• SYNC OFF (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• The delay time may vary depending on audio
format, sound field and speaker distance settings.
x DUAL
Lets you select the language you want to listen
to during digital broadcast when available.
This feature only functions for Dolby Digital
sources.
• MAIN/SUB
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• MAIN
Sound of the main language will be output.
• SUB
Sound of the sub language will be output.
x IN MODE
Lets you set the audio input mode of inputs.
For details, see "Switching between digital
and analog audio (INPUT MODE)" (page 46).