Advanced Operations
Switching between
digital and analog audio
(INPUT MODE)
When you connect equipment to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Press input button to select the
input source.
You can also use the INPUT SELECTOR
on the receiver.
2
Press AMP MENU.
3
Press V/v repeatedly to select
"AUDIO", then press
4
Press V/v repeatedly to select
"IN MODE", then press
5
Press V/v repeatedly to select
the audio input you want.
• AUTO: Gives priority to digital audio
signals when there are both digital and
analog connections.
If there are more than one digital
connection, HDMI audio signals have
priority.
If there are no digital audio signals,
analog audio signals are selected.
• COAX: Specifies the digital audio
signals input to the DIGITAL
COAXIAL jack.
• OPT: Specifies the digital audio signals
input to the DIGITAL OPTICAL jack.
• ANALOG: Specifies the analog audio
signals input to the AUDIO IN (L/R)
jacks.
46
US
Notes
• Some audio input modes may not be set up
based on the input.
• The Audio Return Channel (ARC) function
does not work in the following cases.
– Your TV is not compatible with the Audio
Return Channel (ARC) function.
– "CTRL.HDMI" is set to "CTRL OFF".
– When you do not connect the receiver to
the ARC compatible TV's HDMI jack via
an HDMI cable.
Using the setting menu
You can customize the receiver by making
various adjustments with settings menu.
V/v/B/b
RETURN
O
1
or b.
Press AMP MENU.
2
Press V/v repeatedly to select
or b.
the menu item you want, then
press
3
Press V/v repeatedly to select
the parameter you want to
adjust, then press
4
Press V/v repeatedly to select
the setting you want, then
press
To return to the previous
display
Press B or RETURN O.
To exit the menu
Press AMP MENU.
,
or b.
.
AMP
MENU
or b.