Descargar Imprimir esta página

HQ-Power HQLE10009 Manual Del Usuario página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4.2
Second Attachment
When hung, the luminaire must always be secured with a secondary attachment e.g. a safety cable.
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
fuse
2
power cable
3
sensitivity adjustment knob
6.
Operation
Using the HQLE10009 is very easy: just plug it into the mains, switch it on and adjust the sensitivity of
the built-in microphone. The device will alternately show red, green and blue beams, or a combination of
these.
Switch off after use.
7.
Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
Cleaning
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
Clean the external optics with glass cleaner and a soft cloth every 20 days.
Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).
Do not immerse the device in any liquid.
Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
There are no user-serviceable parts, apart from the fuse and the lamp.
Refer to an authorized dealer for service and/or spare parts.
7.2
Replacing the fuse
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
3.
Remove the rear cover with an appropriate screwdriver.
4.
Open the fuse holder.
5.
Replace with the same fuse type as originally installed.
6.
Insert the fuse holder back in its place, replace the rear cover and reconnect power.
V. 02 – 18/01/2017
HQLE10009
4
microphone
5
on-off switch
5
©Velleman nv

Publicidad

loading