Publicidad
STEP 26
20t
(x1)
With a person on each side, carefully
lift the bed frame in the closed
position. While one person pushes the
bed frame into the cabinet, passed the
90 degrees, the other person is to
engage the "front" Gas Piston (20h)
on each side of the unit, to the front
pin of the Left and Right Pivot Arm
(20e & 20f). Then tightly secure with
two Nuts (20r).
To engage the "rear" Gas Piston (20h)
on each side of the unit, slowly and
carefully wiggle the bed frame back
and forth until you can insert the Gas
Pistons (20h) onto the rear pin of the
Left and Right Pivot Arm (20e & 20f).
Then tightly secure with two Nuts
(20r).
20h
ameriwoodhome.com
20r
(x4)
20r
push here
into cabinet
36
Publicidad
