Publicidad
Idiomas disponibles
Idiomas disponibles
• If the calibration was successful, you can start riding the
bike with power meter.
Calibration value
-3 to +3
1010
25
EN
50
75
The zero-offset calibration can be also performed using mo-
bile app „INPEAK Manager".
NOTE!
Calibration cannot be performed while cycling.
We recommend performing a calibration before each ride –
this will ensure that the POWERCRANK power meter read-
ings are correct. Calibration should be carried out under
the conditions in which the ride will take place, after about
2-3 minutes of riding. Calibration must be carried out each
time the device is assembled. Calibration performed from
the computer/watch or mobile app has the same effect and
can be used interchangeably.
7. Software update
Software updates are posted on the manufacturer's website
in the support tab inpeak.pl/en/support_en/. POWERCRANK
supports the over-the-air (OTA) – wireless software update.
More information can be found on the manufacturer's web-
site.
8. Cleaning/care of the device
• For cleaning, use water with mild cleaning agents, e.g.
soap, lotion, shampoo for bicycles washing, etc.
Description
OK – POWERCRANK SINGLE
OK – POWERCRANK TWIN2
ERROR – wrong crank
position
ERROR – battery low
ERROR – device failure
22
• Do not use pressure washers for POWERCANK device
washing (see point 2).
• Do not use aggressive substances for cleaning – solvents,
etc.
9. Recycling
Protect the environment! Electronic equipment
does not belong to household garbage. Use the
collection points provided for taking off the electri-
cal equipment and return the equipment which will no longer
be used there.
Information on where to dispose the used equipment can be
obtained at regional municipal offices or in the municipal ad-
ministration.
10. Warranty conditions
Inpeak s.c. with registered office at: ul. Zabrodzka 40/2, 52-
336 Wrocław, makes the warranty on the POWERCRANK
device in its original packaging ("POWERCRANK product"),
including material defects and performance defects that
appear during normal product use in accordance with the
instructions for use, technical data and other published
guidelines concerning the POWERCRANK Product, for a pe-
riod of 24 months from the date of the original retail purchase
made by the end-user buyer ("Warranty period"). The user
may exercise the powers conferred on under this warranty
for the POWERCRANK product through the service points
indicated by Inpeak s.c. in this document or on the website
www.inpeak.pl/en/. In the event of any material defects or
manufacturing defects, the user may direct the claims to In-
peak s.c. even if purchased a POWERCRANK product from
another retailer, if the warranty period has not yet expired
since the date of purchase of the new product. The condition
of the warranty is to show the proof of a new product pur-
chase.
This warranty does not apply to the non-branded InPEAK
s.c. equipment, even in the package or sold with the POWER-
CRANK product. This warranty does not apply to parts that
wear out over time, such as batteries or protective coatings,
unless damage occurred as a result of material defects or
manufacturing defects; minor damage, including scratch-
23
EN
Publicidad
