LG RN1870AH1 Manual De Usuario página 26

26
PROGRAMMING MODE
4-1. Pause function setup
Enter setup mode.
You will see LqC1
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display .
Press the Start button.
Press Med Temp. or Low Temp. button and then select
or .
Disable
Enable
Press the Start button.
The machine sets up the pause function, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type - Press "High Temp. " twice.
Button Display
One or the other will
display.