Publicidad
Idiomas disponibles
Idiomas disponibles
38
PROGRAMMING MODE
15. Time to keep the coin (Use only for coin type)
Entering set up
mode.
You will see LqC1
NOTE
Time to keep the coin is available only in coin type. (It hasn't affected on the card type's time setting)
NOTE
• dHUE(drop count) is not available in dryer.
• rSEn(rinse spin enable) is not available in dryer.
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Display previous value.
Press Med Temp.(+) or Low Temp.(-) button to select time be-
tween 0 ~ 180.
Press the Start button.
The machine sets up the time to keep the coin, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press "High Temp. " twice.
Button
Display
Publicidad
