Machine not intended to be connected to the potable
water mains
Waste electrical products should not be disposed
of with household waste, please recycle where
facilities exist. Check with your local authority or
retailer for recycling advice.
1.5 THIS EQUIPMENT MUST BE GROUNDED
In Malfunction or defect in the device is the ground the least
resistance the current is reduced and thereby the risk of electric
shock to the user. The AC power cord is connected to a suitable
outlet be connected to all national standards and regulations
regarding installation and grounding must comply. The operating
voltage is the national power supply. If you are not sure whether
the outlet is properly grounded, ask a qualified electrician or
maintenance technician to check. Take no changes to the device
plug. If a non-matching connector on unit be mounted, pls leave a
suitable plug from a qualified electrician. Do not use this device with
adapter plugs
1.6 USE OF EXTENSION CORDS
Use of an extension cord with this product is NOT RECOMMENDED.
If you must use an extension cord, use only extension cords that
are intended for outdoor use. These cords are identified by a marking
"ACCEPTABLE FOR USE WITH OUTDOOR APPLIANCES, STORE INDOORS
WHILE NOT IN USE." Use only extension cords having an electrical
rating not less than the rating of the product. Examine extension cord
before use. DO NOT USE DAMAGED EXTENSION CORDS!
· Do not pull on cord to disconnect from receptacle, always
disconnect by pulling on plug. Keep cord away from heat and
sharp edges. Always disconnect the extension cord from the
receptacle before disconnecting the product from the extension
cord.
WARNING! TO REDUCE THE RISK OF
ELECTROCUTION, KEEP ALL CONNECTIONS DRY
AND OFF THE GROUND. DO NOT TOUCH THE
PLUG WITH WET HANDS.
· Do not use the appliance if a supply cord or important parts of
the appliance are damaged, e.g. safety devices, high pressure
hoses, trigger gun.
· If an extension cord is used, the plug and socket must be of
watertight construction.
· WARNING: Inadequate extension cords can be dangerous
· Remove the plug from the socket-outlet during cleaning or
maintenance and when replacing arts or converting the machine
to another function.
2. PROPER USE OF THE CLEANER
CAUTION!
THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY!
DO NOT USE HOT WATER IN THIS PRESSURE CLEANER!
Operate the pressure cleaner at no more than the fluid pressure
rated for the pressure cleaner.
Never run the pressure cleaner without a water supply. Running the
unit without a water supply will cause irreparable damage to the
unit.
· Make sure that the water supply you use for the pressure
cleaner is not dirty, sandy, and does not hold any corrosive
chemical products. Using a dirty water supply will compromise
the long life of the pressure cleaner.
· CAUTION - The pressure cleaner can be used for a variety
of applications including washing cars, boats, patios, decks,
garages etc. where high pressure is necessary to remove dirt
and debris.
· High-pressure water flow can damage the work surface if not
used properly!
· See the section titled "Operating Instructions" for more details.
Always test the spray in an open area first.
· NEVER move the unit by pulling on the high pressure hose. Use
the handle provided on the top of the unit.
· Always hold the high pressure gun and wand with two hands.
Keep one hand on the gun/trigger, while supporting the wand
with the other hand (see diagram).
· When dispensing detergent, the pressure cleaner applies
detergent to the cleaning area at low pressure only. Once the
detergent has been applied, spray the detergent off of the work
area by using the adjustable nozzle.
3. ASSEMBLY INSTRUCTIONS
After opening the carton, please remove all parts and check
them against the following list of components that are included:
A. Quick Connector&filter(B)
C. High Pressure Hose
D. High Pressure Hose Clip
E. Gun saddle
N. Power Cable Hook
ENG - 02
F. Cleaning pin
G. Hose Hook
H.
Gun holder
J. Gun
K. Adjustable Nozzle