Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the right upper hinge cover and upper
hinge hole plug.
1
Remove the cylindrical light switch fixed on
the right upper hinge cover.
Remove the right upper hinge and door cover
hole plug.
Open the door cover hole plug, put the
2
wiring harness terminal of the door into the
door cover slot, and close the door cover hole
plug.
Lift the door upwards to disengage it from the
3
middle hinge, put the door to one side and lay it
down gently on a padded surface.
4
Remove left feet and right lower hinge.
Unscrew feet
Remove the hinge shaft
5
hole
and insert it into the left hole. Tighten
the nut and then tighten the feet.
and then unscrew nut
from the right
.
EN-10
Publicidad
