MO-EL 791LG Uso Y Mantenimiento página 9

Model 791-791LG 792-792LG 793-793LG 794-794LG 795-795LG 796-796LG
220-240V ~
Power supply
Total power
Current
Cable H05RN-F
3 x 1.5 mm² 3 x 2.5 mm² 5 x 1.5 mm² 3 x 1.5 mm² 3 x 2.5 mm² 5 x 1.5 mm²
(min.section)
(*) Cable minimum section - per 5 m length.
The models 791, 792, 793, 794, 795 and 796 are intended for indoor
use only and must be kept away from moisture and dust.
The models 791LG, 792LG, 793LG, 794LG, 795LG and 796LG have a
protection degree IP55, so they can be placed outside.
Keep the indicated distances between the heater and the wall/ceil-
•
ing (fig. 1-2-3).
Install the heater in such a way that the lamps stay horizontally.
•
A safety distance of not less than 1 m should always be left in front
•
of the heater.
The appliance must not be located neither directly below, nor in
•
front of a socket-outlet.
Do not use the heater directly near a bathtub, a shower, a swim-
•
ming pool.
Ensure that the power cable cannot come into contact with the re-
•
flector of the appliance and does not intrude into the area of light flux.
Ensure that there is no possibility of inflammable material, combus-
•
tible material or curtains coming into contact with the Heater, or lie
near the heater.
Wall mounting using the braket (provided)
Make sure that the wall where you plan to mount the appli-
ance is solid, and free of electrical cables or water pipes in-
side.
This heater is intended for permanent installation. Be sure
that the heater is not facing the ceiling or inflammable sub-
stances.
Fasten the bracket to the wall by means of 2 dowels at least, passing
220-240V ~
50–60Hz 50–60Hz
2000 W 4000 W
9 A 18 A
380-415V ~
220-240V ~
50–60Hz
50–60Hz
3P+N
3 x 2000 W 1500 W
3 x 9 A 7 A
9
380-415V ~
220-240V ~
50–60Hz
50–60Hz
3P+N
3000 W 3 x 1500 W
14 A 3 x 7 A
Table 1