Descargar Imprimir esta página

MAX TOOLS TR500 Manual Del Usuario página 15

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

max
80
km/h
STEP 5
Connect the red clamp to the battery's positive pole,
connect the black clamp to the battery's negative
pole, start up the engine and have it running
throughout the whole repairing operation.
WARNING
If the engine runs in an indoor place there is a
serious risk of death.
STEP 6
Press the start button on the compressor and inflate until
you reach the desired pressure. Turn the compressor
off, unscrew the hose (warning: it's hot), disconnect the
wire and drive not later than a minute to spread around
the sealant pumped into the Tire.
Warning: every ten minutes turn the compressor
off for at least three minutes.
STEP 7
Drive for 2 or 3 miles and then re-examine the Tire
and inflate to the pressure listed on handbook.
English
15

Publicidad

loading

Productos relacionados para MAX TOOLS TR500