Publicidad
Idiomas disponibles
Idiomas disponibles
Ceiling
Shower Ell
Shower Arm
Setscrew
Wall Flange
Apply
plumbers
Ball Joint
putty.
(Not Provided)
2. Install the Shower Arm - Ceiling-Mount
NOTE: The showerhead with adapter are not provided.
Locate shower ell in ceiling so that shower arm extends outward
from the ceiling per dimensions shown.
Apply thread sealant tape to the threads of each end of the
shower arm.
Place the shower arm in the shower ell.
Carefully tighten the shower arm to the shower ell with a clean
strap wrench.
Apply a bead of plumbers putty or other sealant to the back of
the flange according to the manufacturer's instructions.
Place the flange onto the shower arm as illustrated.
Press the flange against the finished ceiling. Locate setscrew hole
in a position that can not be easily seen after installation.
Secure the flange to the shower arm by tightening the setscrew.
Remove any excess putty.
Turn on the water and allow water to flow through the shower
arm to flush the system of any debris.
Turn off the water.
Install the showerhead according to the showerhead
manufacturer's instructions.
Check for proper operation.
1065141-2-A
Shower Ell
3-5/8" (9.2 cm) Min to
4-1/8" (10.5 cm) Max
Shower Arm
Showerhead
(Not Provided)
4
Ceiling
Kohler Co.
Publicidad
