Publicidad
STEP 18
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE
INSTALLED PROPERLY.
Positon back panel as shown. Align squarely with outer edges. Attach back panel to rear legs (O&P)
with screws (5) but do not tighten. Flush bottom edge of back panel with bottom edge of the
bottom and nail straight into back edges of top (C) and bottom (D). Now tighten the screws (5).
5
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
ameriwoodhome.com
5
(x10)
#A12120
Make sure edge of back panel is
flush with bottom edge of the
bottom.
9
(x24)
#A21110
9
26
Back panel notch location.
5
Publicidad
