Publicidad
Idiomas disponibles
Idiomas disponibles
(A)
FIRING RATES (A)
During operation, burner output varies between:
• MINIMUM OUTPUT: area A;
• MAXIMUM OUTPUT: area B (and C for model
RL 130/M).
Graphs (A):
Horizontal axis
Vertical axis
The work point may be found by plotting a verti-
cal line from the desired delivery and a horizon-
tal line from the pressure in the combustion
chamber. The intersection of these two lines is
the work point which must lie within area A, for
MIN output, and within area B, for MAX output.
In order to utilize also area C (RL 130/M) it is
necessary to perform the calibration of the com-
bustion head as explained on page 5.
Important:
The FIRING RATE area values have been
obtained considering a surrounding temperature
of 20°C, and an atmospheric pressure of 1000
mbar (approx. 100 m above sea level) and with
the combustion head adjusted as shown on
page 6.
D1218
4
: Burner output
: Combustion chamber pres-
sure
Publicidad
