Publicidad
Idiomas disponibles
Idiomas disponibles
1035IM-28-225
ELECTRICAL FIREPLACE ASSEMBLY INSTRUCTIONS
1. Place top (A) to its back down onto a scratch free
surface such as a foam sheet that came in the
packaging. Insert two wooden dowels (CC) into the
predrilled holes on the bottom of top (A). Align left
middle wall (C) and right middle wall (D) to the wooden
dowels on the top (A), securing with four washers
(BB) and four long bolts (AA).
Hardware Used
Long Bolt
AA
Washer
BB
Wooden Dowel
CC
2. Insert four wooden dowels (CC) into holes on the other
end of left middle wall (C) and right middle wall (D).
Place and attach the base (B) to the wooden dowels,
securing with four washers (BB) and four long bolts (AA).
Hardware Used
Long Bolt
AA
Washer
BB
Wooden Dowel
CC
3. Insert four wooden dowels (CC) into outer holes on left
side of the assembly, place left outer wall (E) and
align the hole to the wooden dowels (CC), securing with
four washers (BB) and four long bolts (AA).
Repeat for right outer wall (F).
Hardware Used
Long Bolt
AA
Washer
BB
Wooden Dowel
CC
1
1
x 4
x 4
x 4
2
x 4
x 4
x 4
3
1
x 8
E
x 8
x 8
5
1
A
D
CC
BB
AA
C
D
1
AA
C
BB
1
1
A
B
CC
B
F
CC
BB
AA
Publicidad
