13.3
*
*
14.1
Fittings
•
Remove the lifting eyes before com-
missioning.
•
Remove the transportation immobili-
sers and spacers.
•
Return parts that can be reused to the
manufacturer or supplier.
This installation manual must be given to the customer and kept safely during the entire period of use!
4
15
+0
- 2
a3
Instruction:
* not included in scope of supply, adapt material thickness on
site to ensure correct height alignment
General instruction: The image may differ at detail level.
14.2
Functional test
Levellers are tested and delivered including
the hydraulic oil.
The following must be taken into consideration
during commissioning:
•
Check that the leveller platform and
the loading bay floor are at the same
height.
250
4 3x170
15
+0
- 2
14. Commissioning
•
Make sure that the operators receive
instruction.
•
Perform a trial run.
•
When doing so, refer to the separate
manual for the controls.
•
Check that the leveller operates
smoothly and without excessive noise.
•
Have the safety features tested.
EN
17