Publicidad
Idiomas disponibles
Idiomas disponibles
How to operate your oven
Pop-out operating controls
The function selector and the temperature selector can be
popped out. Press the operating control in question to pop it in
or out.
Switching on the oven
Use the function selector to set the heating function.
1.
Use the temperature selector to set the temperature.
2.
The oven begins to heat up.
Switching off the oven
Turn the function selector and temperature selector to the off
position.
Changing settings
The heating function and temperature or grill setting can be
changed at any time using their respective selectors.
Heating up
To heat up the cooking compartment as quickly as possible,
use the "Circulated air" heating function. If the set temperature
has been reached (indicator light has gone out), set the
required heating function.
Operating the electronic clock
In addition to the clock time and remaining time, the following
symbols may appear on the display:
Symbol
Meaning
Dot between the displayed hours and minutes.
û
Flashes when it is possible to set the clock time.
Timer
V
Displays the operating statuses for the timer.
Automatic mode
A
Displays the operating statuses for Automatic
mode.
Operating readiness
Û
If this symbol is displayed, the oven is ready to
use.
Setting the time on the clock
After the appliance has been connected to the mains or after a
power cut, three zeros and the "A" symbol flash on the display.
Press the
button until the dot flashes on the display.
0
1.
Set the current time with the "+" and "-" buttons.
2.
After seven seconds, the time that has been set is adopted.
Note: To change the set time, press the "+" and "-" buttons until
the dot flashes on the display. Then set the current time with the
"+" and "-" buttons.
Setting the timer
The timer has no influence on the functions of the oven. The
duration of the timer can be set to between 1 minute and 23
hours and 59 minutes.
Press the
button until the
0
1.
and three zeros are displayed.
Set the required cooking time with the "+" and "-" buttons.
2.
An audible signal sounds once the time has elapsed.
symbol flashes on the display
V
Notes
To change the remaining time, press the
■
symbol flashes on the display. Then change the remaining
V
time with the "+" and "-" buttons.
To cancel the setting, press the
■
flashes on the display. Then press the "+" and "-" buttons at
the same time.
Switching off the acoustic signal
Press the "
0
" button until the
After seven minutes, the signal switches off automatically.
Changing the audible signal
Three different audible signals are available.
Press the "+" and "-" buttons simultaneously.
1.
Press the
button.
0
2.
The current audible signal is shown in the display panel, e.g.
"Tone 1".
Press the "-" button to select a different audible signal.
3.
Setting the automatic timer
The electronic clock can be used to switch the oven on or off
automatically.
Automatic switch-off
Press the
0
button until the
1.
and three zeros are displayed.
Press the
function button again until "dur" and "0.00" flash
0
2.
alternately on the display panel and the "A" symbol flashes.
Set the cooking time with the "+" and "-" buttons.
3.
The cooking time can be set to between 1 minute and 10
hours.
Set the required heating function and temperature.
4.
The oven starts and the A symbol and the current clock time
appear on the display panel.
The cooking time has elapsed
An audible signal sounds, the
display panel and the A symbol flashes.
Switch off the temperature selector and function selector.
1.
Press the
0
button until the
2.
The oven switches back to manual mode.
Automatic switch-on and switch-off
Baking or roasting starts for the set duration at a later time
which you chose.
Press the
button until the
0
1.
and three zeros are displayed.
Press the
function button again until "dur" and "0.00" flash
0
2.
alternately on the display panel and the "A" symbol flashes.
The current time may be 17:30, for example.
Set the cooking time (e.g. 1 hour) with the "+" and "-" buttons.
3.
The cooking time can be set to between 1 minute and 10
hours.
Press the
function button again until "End" and the switch-
0
4.
off time "18:30" (i.e. the current time plus the set cooking
time) flash alternately on the display panel.
Set the switch-off time (e.g. 19:30) using the "+" and "-"
5.
buttons.
The switch-off time can be set to up to 23 hours and 59
minutes.
button until the
0
0
button until the symbol
V
symbol disappears.
V
symbol flashes on the display
Û
symbol disappears from the
Û
symbol appears.
symbol flashes on the display
V
7
Publicidad
