Cembre SD-9P-ECO Manual De Uso Y Mantenimiento página 13

9. TRANSPORTING THE MACHINE
After completion of the work, proceed as follows:
9.1) Carefully clean the drill, remove all wood shavings.
9.2) Clean the return spring shafts and lubricate if necessary (see § 6.1.1).
9.3) For ease of transportation, to prevent accidental damage and to keep the machine dr y, use
the recommended steel storage case; ref. VAL-SD (see § 3.5) which can also house the de-
tachable guard and the VAL-P6 accessory case.
10. RETURN TO CEMBRE FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certificate supplied by CEMBRE together with the tool or fill in and attach
the form available in the "ASSISTANCE" section of the CEMBRE website.
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
– The acoustic power level emitted by the machine
L is equal to .........................................................................................................................................101,6 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 and UNI EN 28662-1
Standards and under operating conditions much more severe than those normally found, certify
that the weighted root mean square in frequency of the acceleration the upper limbs are ex-
posed is 5,78 m/sec
13
is equal to .................................................................................................... 93,5 dB (A)
pA
is equal to ...........................................................................109,9 dB (C)
pCPeak
max.
2
ENGLISH